Tata 610 SFC TT

Tata 610 SFC TT Truck Features

Tata 610 SFC TT Detailed Overview

• Engine and Performance

  The engine employed in the Tata 610 SFC TT is a 3.0-litre four-cylinder diesel engine, which also powers several other light-duty commercial vehicles from Tata Motors. Paired with a 5-speed manual gearbox, this engine in the Tata 610 SFC TT makes a maximum power output of 136 PS and a maximum torque output of 300 Nm.

  Summary

  The Tata 610 SFC TT sources its power from a 3.0-litre diesel engine, which produces 136 PS of maximum power and 300 Nm of maximum torque.

• Suspension and Brakes

  The suspension combination used in the Tata 610 SFC TT includes a Parabolic spring with rubber bush, 2 no Hydraulic Double acting Shock Absorbers with Antiroll bar at the front, and Semi elliptical leaf spring, and 2 no Hydraulic Double acting Shock Absorbers at the rear. The Tata 610 SFC TT runs on 7.50-16 tyres at both front and rear.

  Summary

  With 7.50-16 tyres all around, the Tata 610 SFC TT uses a leaf spring-based suspension setup.

• Payload

  The Tata 610 SFC TT is available in three different variants – CBC, HDLB and FSD, all of which share the same gross vehicle weight of 6450 kg and a wheelbase of 3305mm. With a length of 5330mm, the CBC is 10mm shorter than both HDLB and FSD, which have a length of 5340mm. Even the 2075mm width of the CBC variant makes it narrower than the HDLB and FSD variants, which have a width of 2100mm. With a height of 2850mm, the FSD variant is taller than both CBC and HDLB variants, which share the same height of 2300mm. While the ground clearance of the Tata 610 SFC TT is 214mm, its turning radius is 14000mm. The payload capacity of Tata 610 SFC TT is 3,300 kg.

  Summary

  The Tata 610 SFC TT has a payload capacity of 3,300 kg, which is the same for all of its three variants – CBC, HDLB and FSD.

• Exterior

  At the front, the Tata 610 SFC TT shares its design with the regular 610 SFC, which in itself is derived from the 407 range of light-duty commercial trucks. At the front, the Tata 610 SFC TT gets a tapering down the bonnet, which flows towards the vertically-aligned fascia. Covered entirely in a blacked-out theme, the front fascia of the Tata 610 SFC TT includes a boxy-looking grille, flanked by rectangular-shaped headlamps.

  Summary

  The Tata 610 SFC TT shares its design with the 407 range, the highlight of which is the blacked-out front fascia comprising of rectangular headlamps on the corners and a boxy-themed grille in the middle.

• Interior

  The overall interior of the Tata 610 SFC TT has an all-black layout, which makes the cabin of the truck look very basic and functional. The driver’s cockpit of the Tata 610 SFC TT has a very basic appeal with a two-spoke steering wheel and a dated-looking instrument console. The centre console of the Tata 610 SFC TT looks basic too, with an array of switches in the lower part and a 1-DIN audio system in the upper part flanked with air blowers on either side. 

  Summary

  The all-black cabin of the Tata 610 SFC TT looks basic, and gets a dated-looking design for the steering wheel, instrument console and centre console.

• Features

  The must-have features present in the Tata 610 SFC TT include air blowers, power steering, a 1-DIN audio system and a closed glovebox on the co-passenger side of the dashboard. 

  Summary

  The list of features in the Tata 610 SFC TT includes power steering, glovebox and air blowers.